Microduct Connectors & Sealing

Direct Install – Blown Fiber Push-fit

Straight Connectors with Locking Clips

Description

Details of the common push-fit straight connector. In sizes to match the microduct (m/d) diameters, the fittings are pushed onto a clean-cut m/d end and make a seal with internal O-rings. If the m/d is pulled away from the connector, internal teeth, and a tapered body cause the tube to be gripped tighter. Removal of the m/d is achieved by pressing the collet inwards.

Features

* Provides high-tensile, pressure-tight connection for microducts with identical outer diameters

* Base body made of impact-resistant material (proven with spade test followed by pressure test)

* Transparent base body for visual inspection of the connection

* Clamping teeth made of corrosion-free spring steel (tested according to EN 61386‑24 or EN 61386‑1)

* Pre-fitted locking clips prevent accidental disengage when installed

* Suitable for direct install below ground and blow-in pressures up to 15 bar

* Internal pressure test according to DIN 16874 (170 h/80 °C/4.0 MPa)

* Can be removed and reused if necessary

* For suitable for in-house use, flame-retardant styles are available according to EN 61386-22 and halogen-free

Structure & Material

Notes:

1. Please confirm the microduct outer diameter whether has damaged or scratches, connection face must be clean.

2. Please confirm the microduct outer diameter nominal tolerances meets土0.1mm.

3. Please make sure the connection microduct end face is cut into the rectangular plane.

4. Please confirm the microduct should be through the sealing ring, and have been pushed to the end of the joint until it couldn't go far again.

5. After connecting the microducts, must check whether the duct can pull, then put into use.

6. When disassembling the microducts, please make sure the pressure is 0.

Specifications

Order Information

*Note: Different Colors, FR styles or Oblique Angle Footprints are available.

Shanghai Yogel Communication Equipment Co., Ltd. is a professional company engaged in passive optical network (PON) products, fusion splicers&accessories and fiber optic testing & maintaining tools.

We provide manufacturing, sales and services of patch cords, pigtalis, water-proof cable assemblies, fast connectors, fiber couplers or splitters, WDMs, optical adapters, fiber distribution or terminal boxes, ODF, splice closures, outside plants, indoor or outdoor fiber optic cables, FTTH drop cables, and fiber optic blowing products, including microducts, tuble bundles, microduct closures and connector accessories. Based on competitive prices, high-quality products and innovative technology, we stand apart from the rest in domestic FTTx, and cable TV broadcast industry.

We are located in Shanghai, with convenient transportation access. Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction. In recent years, our company develops a series of advanced equipment used in central office, that is, Optical Line Terminals (OLTs), Optical Network Units (ONUs) in broadband internet area and Optical Transmitters, 1550nm EDFAs, Optical Nodes in Cable TV multi-system platform. Otherwise, we present products of fiber optic testing & maintaining tools including Single Fiber Fusion Splicers, Fiber Cleavers, Cable Slitters, Fiber Cleaners, Splice Protection Sleeves, Single or Ribbon Fiber Mechanical Splicers, PON Power meters, Light Sources, VFLs, Fiber Identifiers and OTDRs. That help us assembling a superior team of highly talented engineers. With these people, we can design and provide all range of solutions and production services in optical access networks or "The Last Miles".

In addition, we have obtained ISO9001, SGS, the State Administration of Radio, Film & TV network access for broadcast equipment certificates and carry out IEC and CE standard strictly. In many cities and provinces around China, our products are widely used in Telecom, CATV, and all kinds of optical communication network. We also welcome OEM and ODM orders. Customized, Individual requirements and Samples are available. Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements. They will never disappoint you.

With Yogel, you will get more. We sincerely welcome friends from all over the world to visit our company and cooperate with us on the basis of long-term mutual benefits.